Quelltext der Seite Fernsehen mit der XBOX - Installation von Xineliboutput auf der xBox

==Diese Anleitung orientiert sich an einem Wiki Eintrag und beschreibt die Installation von Xineliboutput mit Hilfe von Xebian auf der XBOX.==


1. Als erstes muss Xebian auf der XBOX installiert werden. Dazu benötigt ihr eine XBOX auf der unsignierte Software läuft. Das Image gibt es hier zum herunterladen. 

2. Debian Grundkonfiguration: 
Nameserver anpassen: 
 vim /etc/resolv.conf
Standard Software installieren: 
 apt-get update
 apt-get install vim unp bzip2
 Exim4 entfernen, da Mailserver nicht benötigt wird: 
 apt-get remove --purge exim4
Syntax Highlighting aktivieren: 
 vim /etc/vim/vimrc
Die Zeile 
 " syntax on
einkommentieren 
 syntax on
Falls DHCP gewünscht wird müssen die Interfaces angepasst werden: 
 vim /etc/network/interfaces
In diesem Fall muss das static in dhcp geändert werden, die 3 Zeilen darunter werden auskommentiert. 
 vim /etc/apt/sources.list
<source lang=bash>
deb http://ftp.at.debian.org/debian/ stable main contrib non-free
deb http://non-us.debian.org/debian-non-US stable/non-US main contrib non-free
deb-src http://non-us.debian.org/debian-non-US stable/non-US main contrib non-free
deb http://security.debian.org/ stable/updates main contrib non-free
deb-src http://security.debian.org/ stable/updates main contrib non-free
#Debian Multimedia
deb http://www.debian-multimedia.org etch main
deb-src http://debian-multimedia.org etch main
# VDR
deb http://e-tobi.net/vdr-experimental etch base addons vdr-multipatch
</source>
 apt-get update

'''ACHTUNG NICHT: apt-get upgrade ausführen'''

Nun verbindet man sich am besten per SSH zur XBOX.

3. XServer Installation: 
 apt-get install xserver-xorg xineliboutput-sxfe xterm xfonts-base xfonts-base
 vim /etc/X11/xorg.conf
<source lang=bash>
Section "Files"
FontPath        "/usr/share/fonts/X11/misc"
FontPath        "/usr/X11R6/lib/X11/fonts/misc"
FontPath        "/usr/share/fonts/X11/cyrillic"
FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath        "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath        "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath        "/usr/share/fonts/X11/Type1"
FontPath        "/usr/X11R6/lib/X11/fonts/Type1"
FontPath        "/usr/share/fonts/X11/100dpi"
FontPath        "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath        "/usr/share/fonts/X11/75dpi"
FontPath        "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load    "bitmap"
Load    "dbe"
Load    "ddc"
Load    "dri"
Load    "extmod"
Load    "freetype"
Load    "glx"
Load    "int10"
Load    "record"
Load    "vbe"
EndSection 

Section "InputDevice"
Identifier      "Generic Keyboard"
Driver          "kbd"
Option          "CoreKeyboard"
Option          "XkbRules"      "xorg"
Option          "XkbModel"      "pc105"
Option          "XkbLayout"     "us"
EndSection 

Section "InputDevice"
Identifier      "Configured Mouse"
Driver          "mouse"
Option          "CorePointer"
Option          "Device"                "/dev/input/mice"
Option          "Protocol"              "ImPS/2"
Option          "Emulate3Buttons"       "true"
EndSection  

Section "Device"
Identifier      "nVidia Corporation GeForce3 MX for XBox"
#       Driver          "nv"
Driver          "nvxbox"
Option          "UseFBDev"              "true"
Option          "HWCursor"              "false"
#       Option          "NoAccel"               "true"
EndSection 

Section "Device"
Identifier      "Frame Buffer"
Driver          "fbdev"
Option          "UseFBDev"              "true"
EndSection

Section "Monitor"
Identifier      "Generic Monitor"
Option          "DPMS"
HorizSync       28-32
VertRefresh     43-60
EndSection 

Section "Screen"
Identifier      "Default Screen"
Device          "nVidia Corporation GeForce3 MX for XBox"
#       Device          "Frame Buffer"
Monitor         "Generic Monitor"
DefaultDepth    24
SubSection "Display"
Depth           1
Modes           "640x480"
EndSubSection
SubSection "Display"
Depth           4
Modes           "640x480"
EndSubSection
SubSection "Display"
Depth           8
Modes           "640x480"
EndSubSection
SubSection "Display"
Depth           15
Modes           "640x480"
EndSubSection
SubSection "Display"
Depth           16
Modes           "640x480"
EndSubSection
SubSection "Display"
Depth           24
Modes           "640x480"
EndSubSection
EndSection 

Section "DRI"
Mode    0666
EndSection
</source>
4. Init Skript anpassen: 
 vim /etc/init.d/xorg
<source lang=bash>
#! /bin/sh
### BEGIN INIT INFO
# Provides:          X4VDR
# Required-Start:    $local_fs
# Required-Stop:     vdr
# Default-Start:     2
# Default-Stop:
# Short-Description: X-Server for VDR
# Description:       Starts the X-Server for the VDR.
### END INIT INFO
#
# Author:            Helmar Gerloni <helmar@gerloni.net>
# Version:           2006-09-13
#

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="X-Server for VDR"
NAME=X4VDR
PIDFILE=/var/run/$NAME\.pid
SCRIPTNAME=/etc/init.d/$NAME

#
#       Function that starts X.
#
d_start() {
       vdr-sxfe --tcp --reconnect --syslog --fullscreen --video=xv xvdr://vdr.server.ip:37890 > /dev/null 2&>1 &
       start-stop-daemon --start --background --pidfile $PIDFILE --make-pidfile --exec /usr/bin/X -- :0 vt7 -br -nolisten tcp
       if [ $? -gt 0 ]; then
               echo "Error starting X-Server."
               exit $?
       fi
} 

#
#       Function that stops X.
#
d_stop() {
       start-stop-daemon --stop --quiet --pidfile $PIDFILE
       if [ $? -gt 0 ]; then
               echo "Error stopping X-Server."
       fi
}

case "$1" in
 start)
       echo -n "Starting $DESC: $NAME"
       d_start
       echo "."
       ;;
 stop)
       echo -n "Stopping $DESC: $NAME"
       d_stop
       echo "."
       ;;
*)
       echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
       exit 1
       ;;
esac 

exit 0
</source>
Das Script ausführbar machen mit: 
 chmod ug+x /etc/init.d/xorg
Das VDR Script startet nun den X-Server und zugleich vdr-sxfe. Zum starten und testen einfach: 
 /etc/init.d/xorg start
eingeben