Turnigy 9x: Unterschied zwischen den Versionen
Aus Technik-fan.de Wiki
Admin (Diskussion | Beiträge) |
Admin (Diskussion | Beiträge) |
||
| Zeile 36: | Zeile 36: | ||
avrdude: safemode: Fuses OK | avrdude: safemode: Fuses OK | ||
| + | avrdude done. Thank you. | ||
| + | |||
| + | Backup anlegen: | ||
| + | |||
| + | avrdude -c avrispmkII -p m64 -U flash:r:backupflash.bin:r -v -P usb | ||
| + | |||
| + | avrdude: AVR device initialized and ready to accept instructions | ||
| + | Reading | ################################################## | 100% 0.03s | ||
| + | avrdude: Device signature = 0x1e9602 | ||
| + | avrdude: safemode: lfuse reads as E | ||
| + | avrdude: safemode: hfuse reads as 89 | ||
| + | avrdude: safemode: efuse reads as FF | ||
| + | avrdude: reading flash memory: | ||
| + | Reading | ################################################## | 100% 12.38s | ||
| + | avrdude: writing output file "backupflash.bin" | ||
| + | avrdude: safemode: lfuse reads as E | ||
| + | avrdude: safemode: hfuse reads as 89 | ||
| + | avrdude: safemode: efuse reads as FF | ||
| + | avrdude: safemode: Fuses OK | ||
avrdude done. Thank you. | avrdude done. Thank you. | ||
Version vom 15. Februar 2012, 20:26 Uhr
In diesem Artikel wird beschrieben wie eine alternative Firmware auf den Modellbau Sender Turnigy 9x aufgespielt werden kann.
- Kabel einlöten
- Programmer anstecken
- Treiber herunterladen: http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-bin-1.2.6.0.zip/download
- Win AVR herunterladen: http://sourceforge.net/projects/winavr/files
- Programmieren:
avrdude: stk500v2_command(): command failed
avrdude: stk500v2_command(): unknown status 0xc9
avrdude: stk500v2_program_enable(): cannot get connection status
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
Um den Fehler zu beseitigen:
- Sender Ausschalten
- Alle Kabel zum Programmer und PC verbinden
- Alle Schalter auf "AUS"
- Flachband Kabel der Rückseite des Senders (mit den Batterien) einstecken
- Sender Einschalten
avrdude -c avrispmkII -p m64 -v -P usb
Reading | ################################################## | 100% 0.03s avrdude: Device signature = 0x1e9602 avrdude: safemode: lfuse reads as E avrdude: safemode: hfuse reads as 89 avrdude: safemode: efuse reads as FF avrdude: safemode: lfuse reads as E avrdude: safemode: hfuse reads as 89 avrdude: safemode: efuse reads as FF avrdude: safemode: Fuses OK avrdude done. Thank you.
Backup anlegen:
avrdude -c avrispmkII -p m64 -U flash:r:backupflash.bin:r -v -P usb
avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.03s avrdude: Device signature = 0x1e9602 avrdude: safemode: lfuse reads as E avrdude: safemode: hfuse reads as 89 avrdude: safemode: efuse reads as FF avrdude: reading flash memory: Reading | ################################################## | 100% 12.38s avrdude: writing output file "backupflash.bin" avrdude: safemode: lfuse reads as E avrdude: safemode: hfuse reads as 89 avrdude: safemode: efuse reads as FF avrdude: safemode: Fuses OK avrdude done. Thank you.
